Snowmobile Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
i have a buddy that has a '98 ZR600 carb sled. Today while he was riding he noticed that he had a crack in his pipe, just before where it makes the big turn and then flares. IS just a hairline fracture of about 3-4 inches.
Can this be welded/repaired?
What other pipes will fit this ie. other sled models/years.

he is bummed.
15+ inches in mpls.
 

·
Registered
Joined
·
96 Posts
if its a bit rusted your better off sanding it down and having it brazed. It'll last a long while if its done properly. I would not recommen having it welded. I've been down that road before and they just do not last. If the pipe is new and there is no rust whats so ever then you could try it. But be safe, and get it brazed.
 
1 - 3 of 3 Posts
Top