Snowmobile Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter #1
I am having some difficulty removing the front heat exchanger on a 1997 Yamaha Vmax SX 600 twin. Ive got all the rivets out but cant get it out. Any ideas?
 

·
Registered
Joined
·
1 Posts
I just did it on a 98 700 had to drill out the rivets. Remove the track and drive gear. Put a bottle jack across the sled and pry it apart a little and it came right out. Make sure if u got all the rivets. I missed one behind the steering shaft.
 

·
Registered
Joined
·
1,278 Posts
This is from 2008, I would bet he has this taken care of long ago. Not too mention he hasn't been since 2014.
 
1 - 4 of 4 Posts
Top