Snowmobile Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
125 Posts
Discussion Starter #1
Hi, I'm new to the boards, but I need a quick answer. I have a 1999 Polaris 600 XCSP. I need to replace the track, but I'm not sure what size it is!! I think it's the 121" x 15"x 3/4 " that's on there now. I want to replace it with a 1 1/2 lug sized track. Does my sled have a 121 x 15, or no???? Any help is appreciated!!!
Thanks, Kevin
 

·
Registered
Joined
·
2 Posts
I need information what I need to do to change track of my polaris indy lite 340 1998 factory track is 136x15 lug height 82".
Now I want change to 136x15 lug height 1.25
 

·
Registered
Joined
·
94 Posts
1.25" Track

Mudflap64 said:
Hi, I'm new to the boards, but I need a quick answer. I have a 1999 Polaris 600 XCSP. I need to replace the track, but I'm not sure what size it is!! I think it's the 121" x 15"x 3/4 " that's on there now. I want to replace it with a 1 1/2 lug sized track. Does my sled have a 121 x 15, or no???? Any help is appreciated!!!
Thanks, Kevin

You should not exceed 1.25 track :dunno: (121x15x1.25). Sit on a stud;:eek: that is what your tunnel will feel if you stud a 1.5 track on your sled.:D
 

·
Registered
Joined
·
23 Posts
Why mangovski do you have a 136 on a indy lite 340, expecially why would you want a 1.25 track on that baby.

PS> I'm with Psycho I dont think i would go with anything more than a 1.25" lug just for safety so you dont run into problems. I think you should be fine with a 1.5" but your out $500 or so if it dosent work. Good luck.
 

·
Registered
Joined
·
183 Posts
Psycho said:
You should not exceed 1.25 track :dunno: (121x15x1.25). Sit on a stud;:eek: that is what your tunnel will feel if you stud a 1.5 track on your sled.:D
you can easily out 1.5" on this sled, just don't stud it. personally I would look at 1 1/4" camoplast ripsaw they are a great track and hook like crazy!!!
 
1 - 8 of 8 Posts
Top