[morrirk]

I have a 1998 skidoo formula III 600 and the taillight went out. I have another 98 skidoo and took off the electrical taillight housing and tried on the sled not working and still did not work. Tried new bulbs so that is not the problem. Any easy things I can check based on anyones experiences?

Apreciate any help.

Bob

 

[Renagade]

just answered your other thread. haha

 

[Renagade]

to remove seat there are 2 10mm nuts at rear of tunnel.
take those off, lift seat alittle and pull back.
it will slide off 2 retainers up ft of seat.

 

[Chiselhead]

to remove seat there are 2 10mm nuts at rear of tunnel.
take those off, lift seat alittle and pull back.
it will slide off 2 retainers up ft of seat.

Spray them with sum penatrating oil first.....they usually break cause they so rusted

 

[morrirk]

Yup that was it. Plugged it back in and light worked but then did not get brighter when applied the brake. Ended up getting new tail light housing and works fine now after $50 bucks.

Thanks for all the tips.

Bob