Snowmobile Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hello again guys, I put a 6 inch riser and a a pivot riser kit on my rmk, it has about 6 or 7 inches of bare steering column that has nothing to support it on the top. With all of the torque I can put on the column with the new riser I am worried that I will bend the shaft or break it. If anyone knows of an outfit that makes a brace for this (its a 99 700) I would appreciate a heads up, or if you have made one yourself, any tips would be appreciated. Thanks guys.
 
1 - 1 of 1 Posts
Top