Snowmobile Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
4,678 Posts
Simple solution to the scratching the bed liner is to get a piece of plywood and cut it to the bed dimensions. I'd probably go with the 7/16. Thin enough to not be a pain, but thick enough to be durable.

Sled Deck on that Ranger is just to much in my humble opinion. My older Ranger was rated at 800 lbs in the bed. Snowmachine is 500+ lbs with about 1/4 of it hanging out the back.

I'm with kccats, keep looking for a trailer. That would be the only way I'd feel safe hauling them in a Ranger.

Putting a shield or simply getting covers for your machines is the way to protect them.
 
1 - 1 of 1 Posts
Top