Snowmobile Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
can anyone tell me if I can put a 1.25 inch Kimpex Tomahawk track on a 2000 ski doo formula 500 LC.The new track comes with drives that are 3.00 pitch ,8 tooth, on a 1 1/4 drive shaft. Was in the process of removing old track and was not sure if I will have clearance at the front end of the tunnel. The factory track is 121 ,15, 2.52 pitch, .725 lugs. Snowmobile newbe here!!
 

·
Registered
Joined
·
315 Posts
i an somewhat certain that the pitch has to be same , thats the space between the drive lugs if i understand it correctly ,and that will have to fit your drivers !!!
 
1 - 3 of 3 Posts
Top