Snowmobile Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hi guys, new to the site and have a question. I bought a 97 ZL 440 for my son and it has a rip in the seat that I want to get fixed. How do I remove the seat? Do i remove the two bolts on the underside of the tunnel near the back? Thanks
 

·
Registered
Joined
·
230 Posts
If it's the same as my 97 ZR which i think it is. There are two nuts inside the rear storage in the seat and then the two in the underside of the tunnel. Then you have to remove the sides from the cowling because the tank and the seat are all in one. Then unbolt the tank from the tunnel. make sure you unplug the light harness and you will have to unplug the fuel pump and disconnect the fuel line.
 
1 - 4 of 4 Posts
Top