Snowmobile Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
52 Posts
Discussion Starter #1
Ok. I'm on a information roll here so let me go. I have two 2002 ZR's. I took both suspension apart and rebuilt as needed. After re-assembly I find that the rear sags more than what I think is correct for my '02 800, my brother in-laws stock '01 ZR has the two Inner Link rods for the rear shock assembly bolted in the middle hole. My '02 are mounted in the first or forward hole closets to the front of the sled. What is correct here. I have looked at exploded views and each view whether or not it's a '01 or '02 has the Inner link mounted on the center hole. Will moving these rods to the front as depicted help with suspension sag.

P.S I know the shocks are good. Fresh rebuild.

Wacky
 
1 - 1 of 1 Posts
Top