Snowmobile Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
So I got a Polaris xlt touring 600 this year and I wasn’t getting any power so I swapped plugs and got a new belt. That solved to problem for a bit until the left cylinder started blowing plugs like there was no tomorrow

I was out today and only went about 30 miles but went through 3 brand new plugs, any ideas on what I could do?
 

· Administrator
Joined
·
19,934 Posts
I would also unscrew the plug boot from the ignition wire and snip about 1/4" of wire off. Then make sure the screw in the boot is not corroded, and screw the boot back on the wire. Some times that will help with fouling plugs.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top