Snowmobile Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
427 Posts
Discussion Starter · #1 ·
I've borrowed the tools. Are the threads standard ? Righty tighty lefty loosey, or lefty tighty righty loosey?

SSsup?

I'm talking spider and spider jam nut here.
 

·
Registered
Joined
·
608 Posts
yes , right hand thread. Usually need a 3/4 breaker bar and a piece of pipe ot loosen.
Mark the cover the spider and the movable sheave and be sure to install them the same way they came off. Spider tightening torque 200 ft pounds and jam nut 225 foot pounds
 

·
Registered
Joined
·
427 Posts
Discussion Starter · #5 ·
Got it. Thanks guys.

I was kind of hoping for a quick response as I already had the tool on the clutch.

It was tight but didn't feel like there was any thread locking compound on it. 1/2-1/4 turn and it spun right off. Did use a 5' bar.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top