Snowmobile Forum banner

need help with front axle please

1K views 3 replies 2 participants last post by  JimmyV 
#1 ·
I am stuck on how to get the front axle out of my sxr 700? I have the chaincase cover off and the gears out and the secondary off and the speedo gearbox off, and also the bearings out. now I just need to know how to get the axle out? any help would be greatly appreciated.

thanks
 
#4 ·
There is probably a snap ring, you'll need a good set of snapring pliers if this is the case. You should not have to remove the chaincase. Just remove the snapring and push it towards the chaincase side and it should come right out.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top