Snowmobile Forum banner

Need help to jet with K&N

633 views 1 reply 2 participants last post by  smallengineguy 
#1 ·
Hi I'm going to put K&N filter (with snowcharger) on my 1992 mach 1 . The stock jetting is 420 mainjet (pto) 440 mainjet (mag) and 35 pilot jet both side.
I want to know if I'm going to be ok if I buy like 5 or more jet like 430-450-460-470 etc or will I need to go bigger.
What I want to know is how much bigger the jets in your sled (with K&N) is bigger than the stock one. It's only to get the right stuff to do the jetting.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top