Snowmobile Forum banner

1 - 3 of 3 Posts

·
Brad "the Man" Borgens
Joined
·
35 Posts
Discussion Starter #1
I took my clutch off to clean it, and the secondary. I didn't know about the arrows on the primary clutch till after i took it apart. I got them lined back up now with the back plate, sort of the back plate arrow is like a 1/4 inch off. I took those button things out and put them back in with all the springs and o-rings. Put it back together with the belt arrows facing forward. clutch kicks in normal at 5,200 ish then I slowly move it along, as it revs up and down like its slipping and grabbing
 

·
Brad "the Man" Borgens
Joined
·
35 Posts
Discussion Starter #3
thanks for the good advice

really? somethings not right? jk. I pulled it off today in the shop. The only thing I saw was one of those buttons wasn't tracking straight. a little crooked. seems OK to ride. will see tomorrow with all this snow that's coming.
 
1 - 3 of 3 Posts
Top