[kccats]

I have fanners to ride around here myself.
Check out the tracks
$500 for pair isn't too bad
May be able to talk him down?

 

[kccats]

The back side of the carb to air box is NOT critical!
I have a 2" No hub Band (no rubber) on my SRV!

 

[kccats]

Yep and go through the boggies too

 

[kccats]

YES replace Both bearings on drive shaft
YES clean your carbs every preseason

 

[kccats]

This is exactly why I preach
CLEAN YOUR CARBS EVERY PRESEASON
My 98 zr Always had a mouse house!
Standard 1/4" fuel line (only the pick up inside the tank needs to be tygon)

 

[kccats]

I got 10' of 1/4 Tygon for $20 on Ebay
1/4 X1/8" brass T can be had as well

 

[kccats]

Ace would have the brass 1/4 x 14 x 1/8" T
(Im a Plumber)

 

[kccats]

I would replace the bearing any way

 

[kccats]

Get a new tank
Check the parts section on salvage yards

 

[kccats]

I have several fuel tanks
At swap meets they sell for $10 bucks

 

[kccats]

As you pull out the primmer it sucks gas into it
When you push it in it pushes the gas into system
Go back into the carbs
Get the correct needle and seat (as a Set)
Set your floats to 'LEVEL'
And ride!

 

[kccats]

Finding the vent line is way easier