Snowmobile Forum banner
21 - 22 of 22 Posts

· Registered
Joined
·
2,164 Posts
Discussion Starter · #21 ·

· Registered
Joined
·
114 Posts
Just need to finish wiring my LED's up since I didn't have a star bit with me (keep trailer at my wife's grandma's) to wire into the dome light.

Here is a couple pics looking through the "front access door" of our 10' R&R!

Control Pic



I ordered waterproof 5050 White/Pure White/Cool White (depends on what you want to call them!!! :dunno:) LED's, 60 LED's/m. Total length in the trailer at this time is 15', about 270 LED's. One row over each sled. I haven't had it outside yet, but it looks like I have enough light at this time.



Meburdick, in my Reverse Lights thread I have a picture of the junction box I showed you. Makes it easier wiring the 7 way wire harness to the existing trailer
wiring (at least I think so as I don't like the wire taps used by the factory! Lol). I mounted 1 inside the clamshell also as I am running 12v constant power (when the truck is hooked up) so the parking lights don't have to be on to turn the "dome lights" on.

Chris
 
21 - 22 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top