[night911us]

i started my 93 mach1 670 let warm up took it up the lane and down and stalled it wouldnt start it has spark and it has fuel i gave a couple shots of primer still wouldn't start any sugestion i will try starting tommorow.

thanks you in advance.

 

[RJ Gleason]

Hold throttle partly open and try again. Do not prime it.

 

[Parch]

empty the bowls and clean the needle & seat (spray carb cleaner up there)and reinstall

 

[night911us]

i cleaned carbs put back running good except rpm a little high do i fittle with the throttle stop screw and how many turns should it be. thanks.

 

[night911us]

i also forgot when i have it wide open it wil kind of bog down the run properly again it doesnt die but bogs just enough so can notice it.

 

[smallengineguy]

Turn each idle screw until it idles at 1800 RPM.

 

[BskidooC]

Set the clickers on the primary clutch to limit max R.P.M.s

 

[night911us]

i cleaned everything it still stalls after its warmed up like it run out of fuel and all carbs are clean.