Snowmobile Forum banner
1 - 1 of 1 Posts

18 Posts
Discussion Starter · #1 ·
I have a 99 XC500. It started burning out bulbs. All of them low beam,high
beam,taillights,and even melted my electric shield. I replaced the Voltage regulator
with a aftermarket because the dealer had none. It was a little smaller in size
but the guy said it would be fine. Again I burned everything out. I took my sled to a guy
for repair. He says it's putting out around 17 volts before and after the regulator.
I think we are gonna try a stock reg and see what happens. What I am wondering is
what would cook a voltage regulator. Thanks
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.