Snowmobile Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I just out a longer track on my 1995 ZR 580. The clutch engages at a low rpm and i cant get it accelerate very fast but it has top end. What can i change on my clutch weights and how many gear teeth do i have to drop to notice a difference. i have a 20t top and a 39t bottom and i dont know my weights i have in now
 

·
Registered
Joined
·
184 Posts
I am just dealing with the same problem, I am going to try 19 on the top and 40 on the bottom, When I get done I will let you know. right now you are running 1.95 : 1 ratio wich we both know is alot of top end, Looking at stock gearing for the new sleds with long tracks they are any were between 2.01 : 1 or even 2.15 :1 If you change to the 19 and 40 gearing you will be running 2.105 : 1 wich will definetly give greater bottom end, and should be close to what the new ones run

Good luck
hope this helps
 
1 - 3 of 3 Posts
Top