Snowmobile Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter · #1 ·
i have a 1999 xc 600 and put a new polaris belt on it and i noticed the cluch engages at 3500 rpm is this normal or to low and if so what do i have to do to fix this:dunno:
 

·
Administrator
Joined
·
19,291 Posts
It may be a bit low. An engagement that is too low could indicate a worn/broken primary spring, especially if it was higher before and you have not changed anything. When I had my 97 700, the engagement was right at 3500 which is great for not spinning the track and making trenches. With a shorter track, closer to 4000 may be optimum.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top