Snowmobile Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Going to assist (and don’t want to be the first 3 letters of that word when finished) with a 99 BearCat 340. Can anyone help me with the settings for the carb (1) what is the setting for the pilot air screw adjustment and (2) what is the throttle stop screw set for idle. This machine seems to die on idle. So guessing to clean the carb and perhaps check the throttle stop setting. Thanks for the help. Cam
 

·
I am Spartacus
Joined
·
23,863 Posts
Initial air screw is one turn out from seated. There is no idle screw position; the sled should idle between 1400-1600 RPMs.
 
1 - 2 of 2 Posts
Top