[ScottRacing291]

Hey i have a 99 Zl600 EFI and i just pulled my stator out so be rewound. Now the thing has to go back in....Does any other Arctic cat rider who has a service manual the same as this sled or someone who knows the specs by any chance.I do not have a service manual and do not intend to get one either.
---- So i think its
(1) Big middle nut that holds the stator in place
(3) bolts for the stator
(3) bolts for the flywheel

Any help would be greatly appreciated like always!

 

[jwaldmann89]

Here you go

Technical Data & Charts - The Nutty Company, Inc

http://www.snowmobileforum.com/engine-drivetrain/7254-sled-how-tos-here.html

 

[kccats]

Backer plate (2) would be like 15# 3 bolts for the stator the same. Use a soft lock tight on them. The flywheel nut would need to be like 65#, and be sure the key stays in place.

 

[ScottRacing291]

15#? whats the number? ft pounds or inch pounds

 

[F3_600triple]

ft pounds

 

[kccats]

Yep they are like 6mm allens!