[XPolaris4LifeX]

Went to clean out the carbs on the sled i just got and one of the choke slugs are stuck in the carb and I just wanted to know if anyone has any idea of the best way to remove the slug without damging the carb or choke. Thanks.

 

[RJ Gleason]

Let it soak a day with solvent first.
Then try pulling it out with needle nose pliers.

 

[kccats]

Spray it with PB Blaster and use a small straight screw driver and work it back and forth and replace both plungers!

 

[XPolaris4LifeX]

Got it out by soaking it with wd-40 and using the flat head screwdriver and turning it back and forth. Turns out the holes were filled with sludge, cleaned it out and it fit back in properly and it's all back together and it runs great now. Thanks for the advice.