Snowmobile Forum banner

Adding electric start 99 XCF

566 views 1 reply 2 participants last post by  TheBearAk 
#1 ·
I have a 99 xcf and it has the optional electric start on the ignition but doesn’t seem to be hooked up do I only need to buy a starter or do I need a whole kit?
 
#2 ·
Starter with bracket, Battery, Ring Gear, fuse holder, new regulator, and mounting bracket for the battery.

Typically your ignition key-switch is already set up for e-start as well as the harness.

  • Ring gear bolts onto the primary clutch
  • Start bolts onto the bracket, which bolts onto the motor
  • Battery needs to be mounted, and you'll need the cables.
  • Fuse holder. This goes between the keyswitch and battery.
  • Regulator you have is only for A/C. You'll need one with a DC output.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top