Snowmobile Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
i have 5800 miles on the sled. There is a bog and spit and sputter when i pin it at 5000 to 6000 rpms. have cleaned carbs checked reeds, checked the crank seals. Some one told me that Kiehn carbs will just wear out meaning the float pins and the brass rods will become egg shaped over time is this possible.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top