[powrider686]

I'm about to replace my o-rings on my 97 rmk 700 and someone had told me that it was helpful to put oil on them as I was putting them in and that helped hold them in and lubricate them. I was just trying to clarify this and that it was 2cycle oil I should use. Is this the way to change the o-rings?

 

[BC_Dan]

I use a light coating of grease, it's stickier and keeps the rings in the groove so you don't pinch the dang things. Any oil will work, the lube helps keep the ring "supple" over time so there won't be any leaks...