Snowmobile Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
I’m looking to make my 96 xcr ride higher/ smoother. I’m thinking of doing an xtra 10 swap in the back. I’m wondering how to raise the front up. Can I just get 10 inch shocks or do I need new tie rods also. I’ve heard that xtra 10 or 12 spindles can add some height to the front. I’ve also heard that removing the sway bar up front is something that some people like but it makes the sled squirrelly on trails but better at ditch banging. What would you guys recommend for the front end.
 

·
Registered
Joined
·
2,109 Posts
What '96 XCR? 440? 600? And are you sure you don't already have a Xtra-10 on it? And if it doesn't you need to change out the whole front end suspension to do it. The XCR package was supposed to have the Xtra-10 on it from factory starting on some '95 models and all '96 models and forward.
 
1 - 2 of 2 Posts
Top