Joined
·
8 Posts
i just rebuilt my 583 and cleaned out and rebuilt the carbs and took it out for 3 1/2 - 1 hour test rides for some fine tuning and she ran great, i pulled it out of the shop this morning (just below room temp) and she started up but wouldnt run for more than 5 seconds without priming it, i figured that it would run better after it warmed up but no, i had to keep priming it just to keep it running every 5 seconds or so, i did this for about 15 minutes then finally gave up on trying to get it running on its own, what could be causing this? it ran great for the last 3 days and now it wont even stay running, also it was just below -20 this morning and last 3 days have been around -10 if that makes a difference what could have gone wrong? it doesn't seem to be getting fuel 
