Snowmobile Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
im having some problems with my snowmobile its been bogging at about 5000 rpms i cleaned the clutches out and the carbs and it didnt fix anything.... my uncle said it could be the jets since i have a dg dual pipes on it... any thoughts?
 

·
Premium Member
Joined
·
5,737 Posts
your uncle may be on the right track. i would verify needle setting as it sounds like its sucking all the fuel from the midrange. alot of people mess up when setting needles.
 

·
Registered
Joined
·
164 Posts
Doing what?

You've had your carbs apart already? Did you write down the current jet sizes? Did anything occur right before the problem started? Did you make any modifications before it started bogging? Pipes?
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #6 ·
no i bought it and the first day it was fine then the second day it started bogging and so on... it has dg pipes i cleaned out the clutches and carbs and reeds. do you think i need new jets if so then where can i find them and if dont what do i have to do?
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top