Snowmobile Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter #1
Well I recently had a lot of work performed on my old sled and now that the sled is home the speed is no longer working. I checked the cable seems tight at both ends, shop says they had the hood off and I see on the back of the speedi there is 2 threads could they have threaded it onto the wrong one? Need some help thanks
 

·
Registered
Joined
·
350 Posts
to check the cable you could remove it from the speedo and take it for a spin and see if it turns, if it doesnt then the problem is either the cable or the thing that it hooks to down under the secondary d, dont know what it is called... if it does spin, the problem might be in the thing u stated that has two heads... one of the heads is for kph and the other is for mph... you can also remove that and turn it by hand to see if that is working...
 

·
Registered
Joined
·
43 Posts
Discussion Starter #3
Ok I will start by spinning that adapter to see if it rotates the dial
 
1 - 3 of 3 Posts
Top