Snowmobile Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
477 Posts
Just get them replated if they are that bad, or replace them with a good set. To pay a machinest to do the machine work to the cylinders will cost you alot more then if you were to have them replated. Forged pistons are nice but not neccesary. SPI makes a good set of replacment pistons.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top