[leearchibald]

my has been working great,i mean really good but it has been between -20c and -30c.But the other day it warmed up to between -5 and 0.now my sled didn't want to idle so i had to turn in my idle screws and is abit boggy down low,is this happening because it has gotten so warm?

 

[leearchibald]

bump

 

[rgoers]

Are you sure you turned idle screws??? May have turned air screw...???

 

[leearchibald]

i am 100% that i turned the idle screws,the big ones with the springs on them

 

[kccats]

All that would do is raise the idle! You might want to lower (raise the E clip) your needles! And turn OUT your air screws!

 

[leearchibald]

thats not really what i meant,i mean is the ambient temp(being so warm outside) causing it to act boggy and not want to idle and that is why i had to turn in my idle screws.