Snowmobile Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Does anyone know if it is possible put a firecat track 128"x13.5" wide track on an 87 phazer using stock drivers and a standard width suspension from a phazer if the suspension is moved back to compensate. So basically is a firecat track have the same spacing for the drivers and rails compared to a standard 15" track
 

·
Premium Member
Joined
·
5,737 Posts
not saying it will or wont, but i will give you a mathematical theory you can test for yourself.

look at your sled now and observe the distance between the bogie wheels and the track edge. most will be at or near 3/4". so if you deduct 13.5 from 15 you end up with 1.5. divide that by 2=.75 or 3/4. that puts your stock skid wheels right on the edge of the track. too close to to be reliable in my opinion.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
alright thanks I thought it would be interesting to try i have seen a lot of firecat tracks cheap and they are aggressive looking and get more traction if they are not as wide for the light phazer
 
1 - 3 of 3 Posts
Top