Snowmobile Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
93 Posts
Discussion Starter #1
I had to install my stator setup with the engine assembled so I had to remove the four wires from the black connector and fish them through the hole in the case. Then, I put the four wires back into the connector, but stupid me I forgot to take a picture of the order of wires in the connector. The two yellow/black wires I'm pretty sure I got right, they are on the left side of the connector when looking at it head on (polarity bump on the top). But the solid yellow and brown wires, I don't remember which was on the top.

Anybody have a picture of one of these?

1996 Touring SLE 500
 
1 - 2 of 2 Posts
Top