Snowmobile Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
i recently rebuilt my 2012 800 and took it out for the first ride got about 50 miles out and lost a cylinder and immediately smelled fuel and she started smoking like a pig. I pulled the belt shroud off and the injector fuel line bracket was gone the bolt that fastens to the injector must have walked out i ordered a new bracket and bolt and tried to reinstall the fuel lines and turns out i stripped the bolt i tried to tap the threads with a 5m x .80 tap and the threads still couldn't hold any torque i don't know if it is safe to drill the hole and re tap it to a 6m x 1.0 if anyone else has ran into this any help would be greatly appreciated have a big 10 day trip middle of February
 
1 - 1 of 1 Posts
Top