I have seen them for sale for as little as $600.00 but it was junk. A very nice original 400XC would bring $1500 and up. Which is pretty good compared to the Indy 400's. It all depends on the condition and how original it is.
hey guys i know this is an old post but i finally did get my sled done and i did put xtra 10 in heres some pics i hope you like it! things i upgraded are: 1 1/2 in paddle track xrta 10 front and back, 3in. bar risers plastic skis new carb boots, windshield, new race tank and seat.
I have one I picked up at the end of last winter for $150, wasn't running. In about 3 minutes I discovered a crack in the main fuel feed off the tank, replaced it and it fired right up. I was told it was a 91 440 XCR but discovered they didn't make the XCR until 92. A quick google of the model # off the side revealed it was a 91 XC 400. Someone peeled off most of the decals and painted "XCR 440" on the hood and the seat isn't original. Everything else is but was in pretty rough shape. I disassembled the entire front end and sandblasted all suspension parts, painted black (they were red but I couldn't find a matching paint) rebuilt the shocks, rear suspension, and all new bearings in the driveline. New hoses, waterpump belt, recoil cord, hyfax, fuel/oil lines, clutches etc. Going to ride it for the first time this weekend. I wasn't looking for an extra sled but a guy I work with had it and wanted to get rid of it since his kids were grown up and out of the house. I can hardly wait to try this thing out. Attached is a picture of it. I have since replaced the seat cover since the one on it was ripped.
man that think looks pretty nice how its set up your tunnel looks like new i wish mine looked like that ha. but whats your serial number on yours? it should tell you what number it is out off the 500 that were only supposively made
I'll check the # this weekend when I take it out riding. I removed the decals right under the seat on the tunnel because they were badly faded. Some aluminum cleaner from NAPA is what cleaned it up nicely.
Im hopefully getting one of these this friday! Im super excited! it has a 2 inch riser, 1 inch track with no studs, this things nice! Decals and paint are kinda faded but im planning on repainting it back to normal color and new decals for it. Cant wait to ride one!
Just wanted to say that yes the indy xc 400 did come out in 1991 and yes it had a 440 L/C motor. My buddy bought one new in 91. It was a polaris prototype thing. It was a new racing sled that had go for a 440. There are not many of those still on the go. Take care of it.
Correct me if Im wrong .. Polaris came out with an XC400 back in 91.5 which I believe was a limited production race sled - in '92, Polaris went into a 440 version. 91xc400, did that sled of yours come with a 38mm carbs? Or is it 34mm? WL