Snowmobile Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
470 Posts
You've dropped 6mm in the bore size of the carb, it will be difficult to predict the correct jetting for this. :dunno: You would also probably need to determine the size and replace the pilot jet as well as the main jet. It would be easier if you could find a used Mikuni BN40 carb.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top