Snowmobile Forum banner
1 - 3 of 3 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
machine ran great most of last weekend then suddenly lost power,
just made it back. Had a look at it tonite, no spark on one cylinder.
checked to see if any wires off or broken, everything looked ok,
then took off coil that had no spark and discovered a wire broken.
Repaired wire, but still no spark. I have limited experience, but it
seems that the coil is bad.
Is there something else I should check before replacing the coil?
Any suggestion greatly appreciated
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.