Snowmobile Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hey guys this is my first post hope you can help me out. I have a 1972 Boa SKi 440 With the Jlo engine. The problem I am having is I had a weak spark that after holding the starter it would fade until I had no spark. So I replaced the Points and condensors, New plug wires and plugs. After reassembling the whole thing I now have no spark. I have double checked everything. Could the stator be bad, Could I have messed up the ignition coils? Could I have screwed up the condensors enought when I soldered them to make it do this? Please help guys. My Dad will sell it If I cant get it going by this weekend.

Thanks Rob
 

·
Registered
Joined
·
711 Posts
You may have hurt it when soidering, but make sure nothing is crossed or in the rong place. Also did you switch up the coil? I am myself confused as to why you had no spark. The best thing you can do is call a local ski-doo dealer.

dano
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
What do you mean by "switch up the coil". I myself have thought that I mught have burnt up the condensors while soldering but I really have a hard time believing that. Any other help would be greatly appreciated.

Rob
 
1 - 3 of 3 Posts
Top