Snowmobile Forum banner
21 - 25 of 25 Posts

· Registered
Joined
·
395 Posts
Discussion Starter · #22 ·
The original hold downs are what I used at the front. Everything worked he way it was designed. At the rear I just used a ratchet strap from the grab bar to the hook welded to the rear.
 

· Registered
Joined
·
395 Posts
Discussion Starter · #23 ·
Well, it’s been a year and a half and I just sold the 2 place and picked up a 3 place. The 2 place worked great. I ended up with a total of $350 invested in the trailer. Sold it fo $500. We picked up an older 3 place from the original owner that was stored indoors.

I’ll start a new thread for the 3 place.
 

· Registered
Joined
·
395 Posts
Discussion Starter · #25 ·
Thanks for the tip. I will probably do that with this trailer. I had it mounted rigid on he old one and it was a non issue. I set it up so whe it tilted it cleared the ground. It never accumulated any snow either. But I do like the idea of it being able to swing.
 
21 - 25 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top