Snowmobile Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. General Sled Chat
    So we was up in the mountains on a wicked powder day, with a short track phazer, a long track (mountain lite) phazer, and a '99 summit x. being an end of march day, we did not expect the powder to be so deep, but the powder wasn't the problem, it was the temperature. As I said, being an end of...
  2. Ski-Doo Snowmobiles
    Does anyone know what size of bolts holds the skid A Arm to the rails on a Formula 500? Looks like the spot where the suspension bolts to. I am no mechanic so mind my terminology! I am striking out on finding this info.. been to a wreckers and 2 skidoo dealers and no one seems to know...
  3. Polaris Snowmobiles
    First snag in the reassembly of my XLT tonight, stripped a rear suspension bolt.... Anyone know the bolt diameter/thread for these nylock bolts so I can tap the hole and either clean up these bolt threads or pick up another bolt off an old sled somewhere?
  4. Polaris Snowmobiles
    Apparently while riding my 2010 Polaris Rush 600 a bolt came loose on the front track suspension. I'll attach some pictures to help clarify what I'm talking about. The bolt is still there, just the nut came off, and it's starting to slide out. I tried pulling on it with a ratchet strap, and crow...
  5. Polaris Snowmobiles
    Hey, I've got my skid out of my new to me 1995 XLT Touring - stock setup with the XC-100, 133.5" rails. I've put in new bearings all around, new slides and everything greased. Wondering what the best suspension tuning setup would be for comfort for two riders on primarily snowy fields and...
  6. General Sled Chat
    Does anyone know if I can swap a newer xtra 10 suspension into an '85 Polaris indy trail? Like maybe a suspension from a '99 or older? Any advice helps, thanks.
  7. Arctic Cat Snowmobiles
    Trying to replace the rear torsion spring on my 95 ext 580. The bogey wheels came off. The idler wheel bearings will not come off. What am I missing? Are they just rusted on? Do i need an idler wheel bearing pulley... Thanks
1-7 of 7 Results