Snowmobile Forum banner

polaris xlt touring

  1. Polaris Snowmobiles
    So I removed my secondary on the weekend to inspect and to replace the buttons. Spring looks good, no real wear on the helix, just popped in the new buttons, clean up and a bit of grease and reassemble. When it comes to preloading the spring, I gather that you want to hold the moveable sheave...
  2. Polaris Snowmobiles
    So up here in the great white north, shipping shipping across the border really affects the decision on buying old stock/used parts... My master cylinder is weeping a little bit, still holding fluid in the system but it's going to need to be looked at soon. Rebuild kits seem to be pricy after...
  3. Engine / Drivetrain
    Hi all, While I was finishing up my carb servicing last night I decided to do an inspection of the primary and noticed the rollers are in rough shape, should likely be rebuilt. 1995 XLT Touring. I have no experience with clutch work, but from my research, other than changing spring and...
  4. Polaris Snowmobiles
    So I got a Polaris xlt touring 600 this year and I wasn’t getting any power so I swapped plugs and got a new belt. That solved to problem for a bit until the left cylinder started blowing plugs like there was no tomorrow I was out today and only went about 30 miles but went through 3 brand new...
Top