Snowmobile Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Polaris Snowmobiles
    I have a 95 classic 500. The mag side exhaust port has oil seeping where the Y-pipe bolts to the jug. But the other side is bone dry. I'm fairly new to this stuff. Just wondering if this is normal or if there's a fix for it.
  2. Polaris Snowmobiles
    Hey guys. I'm pretty new to the snowmobile scene. I have a 95 Indy Classic. I just got a set of the poly EZ steers and a new set of carbides to replace the steel ones that were on my machine when I got it. The EZ steers didn't come with any instructions. How would I go about installing them...
  3. Engine / Drivetrain
    So I am in the process of rebuilding the top end on my 2003 Polaris XCSP 500 Edge and was wondering what website you guys use to order parts. Was looking for an entire kit if possible with the gaskets and everything, but literally cannot find this in stock anywhere. Tried looking at Wiseco’s...
  4. Polaris Snowmobiles
    im just curious how the gen 2 xcf was. was there anything bad with them? ik it's a 488 but how good is the engine? also curious about and wedge indy trail 488. im considering picking them up for second sleds they both have between 3200-3400 miles.
  5. Polaris Snowmobiles
    Just picked up this sled a few weeks back and getting it ready for this season. Starts and runs fine, but has no lights and the tach isn't working. Dash, headlights, taillights etc. It has electric start but currently no battery in it. But the lights should still be on even if you pull start...
  6. Polaris Snowmobiles
    I bought a 2003 xc sp 500 it runs great but when you go from half to full throttle to only goes to 6500 rpm. I've checked the compression and that is 119 and 120 so that is good I'm not sure what the issue is. The snowmobile starts right up first pull (cold) so I'm not sure what the deal with...
1-7 of 7 Results