Snowmobile Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Yamaha Snowmobiles
    Does Exciter 2 and phazer share the same skid?
  2. Yamaha Snowmobiles
    Hello all - hoping some knowledge out here can help me diagnose my problem. Bought a very clean 94 Phazer 2 with 4000 miles on it this fall. Had some carb issues at first (pilot circuit) but a carb kit and good cleaning sorted that out. Carb plugs in the bowl are in the right place - i.e. not...
  3. Yamaha Snowmobiles
    I had my phazer running a few weeks ago after not having spark and somehow ending up fixing it after flipping the coil box around 180 degrees from where the previous owner had it (I don’t know how that fixed it lol) and it ended up dying after 20 seconds. Carb bowls were completely filled with...
  4. Yamaha Snowmobiles
    I was finally able to get my phazer to start, it had had a ground issue with the coil. It revved up nicely and even idled. I shot around the yard for about 20 seconds till it started to bog down and become unresponsive. I still had it choked so I unchoked it and it idled lower as it should so I...
  5. Yamaha Snowmobiles
    I just picked up a 1990 Yamaha Phazer from my uncle this week, He said he replaced the coil on it and when he went to start it the pull string broke, that was 10 years ago lol. I replaced the pull string and the engine ended up being seized from sitting outside. I freed it up by turning the...
  6. General Sled Chat
    Hello, I’ve been looking for a phazer mountain lite for a while now. Bought one earlier this year, did a track swap on my vmax 500 to make it a 136, and am adding a 144 extension kit into a mid gen phazer this winter. Anyways, you can see that I have a thing for unique sleds. I’d like to have a...
  7. General Sled Chat
    Hello everyone, I posted a while ago asking about a dg exhaust, because they were noticeably cheaper than other brands, and everyone said that they suck. So with that information, I started looking for better pipes, and a buddy approached me with one for 20$, so I took it. Not too bad of shape...
  8. Engine / Drivetrain
    I have a 1988 Phazer and I have a 1976 GP440 engine which I’m trying to put in the phazer. The problem is that the engine bay has a big brace in the way of the fan on the 440 so I’m wondering if its worth cutting the bracing out and welding my own bracing around the 440. If you have any...
1-8 of 8 Results
Top