Snowmobile Forum banner
not starting
1-2 of 2 Results
  1. Engine / Drivetrain
    I just changed both pistons, pins, bearings and rings after the fan belt broke and it overheated then took out the clutch side piston. I removed the smeared piston off the cylinder wall with a little Muratic acid. Cleaned and honed both jugs. Everything went together great and was torqued to...
  2. Arctic Cat Snowmobiles
    Lets start from the beginning before feb vacation i had to replace the aluminum bar where the front of the skid sits on i also changed the bulbs because one burnt out any way i got the sled together the night before we left and it ran fine when i put it in the trailer before we went on our big...
1-2 of 2 Results
Top