Snowmobile Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Arctic Cat Snowmobiles
    I’ve got a 71 panther 440 that’s in really good shape it’s got 120 In both cylinders but it doesn’t have spark and is there any good way about going about the ignition system that I should know about on these old Kawasakis
  2. Vintage Snowmobiles
    Hello, does anyone know where I can find the Mikuni 229 Carb rebuild kit?
  3. Arctic Cat Snowmobiles
    Recently acquired a 1980 Artic cat jag 2000 with 1081 miles on it. Sled starts and idles fantastic. It has good spark and good compression along with a freshly cleaned carburetor. It will idle for as long as you want it to, no problem. When you go to drive it the sled will perform great until a...
  4. Arctic Cat Snowmobiles
    Hi, I have to replace my a arm bracket just wondering if this is possible to do at home and if anyone has experience with this replacement, I have the part just can’t find anything on google for steps to replace the part. Any thing helpful will be approximated. Thanks!!
  5. General Sled Chat
    hey guys, I just bought my first sled which is an Arctic Cat 580 EXT (EFI). The sled doesn't even so much as have a scratch on it and has run like a dream so far. I am just wondering if there are any upgrades people recommend for these sleds, special maintenance, etc. I am using it mainly for...
  6. Arctic Cat Snowmobiles
    Hi everyone I have a 2000 artic cat zl500 efi that won’t run it has good spark I cleaned the injectors the fuel pump seams to work when I hook a battery up to it it pumps it would sputter when I went over 4500 rpms I’m stumped please help
  7. General Sled Chat
    Hi I have a 1990 artic cat jag 440 afs. When I start it it will run great for like 5 minuets then will start cutting in and out. At low rpm it's better but doesn't want to raise. Then like when it's builds up gas in the bowl it will go again full throttle for 500 feet then cuts out again. I have...
  8. Arctic Cat Snowmobiles
    Trying to replace the rear torsion spring on my 95 ext 580. The bogey wheels came off. The idler wheel bearings will not come off. What am I missing? Are they just rusted on? Do i need an idler wheel bearing pulley... Thanks
  9. General Sled Chat
    Have 1980 panther rebuilt fuel pump that is run off of suction line last year. This year it will not start replaced fuel and suction line. filled fuel line with fuel and started right away. there is small amount of suction when I put my finger over suction line. It will run fine with fuel in the...
1-9 of 9 Results
Top