muddy06

I just picked up two 87 Phazer for free I work with the guy and just wanted to get his barn cleaned out. The sled that is in good condition has a bad motor mount that broke off of the motor. I got it started runs good has 125 psi of pressure in each cylinder. Pulled the motor plan in to get the area where the mount bolts onto the motor tig welded this week. The other Phazer is in mint condition and needs a new top end. 90 psi in each cylinder will not start. It was last ran 3 years ago. Both have good tracks seats r in great condition. Just wonder if there is anything to look for that I should know about.

92mach1kid

Hey, i used to have an 88 phazer and it ran perfect nothing ever broke on it and it would always start in 3 pulls for me even at -40 degrees. Only thing is it will over heat if you ride it for 5 hours or more when it is +30 degrees out. Before my dad tuned the carbs the sled would top out at 65MPH then after he tuned it is toped out at 90MPH. Pretty damn good for a 485 fan cooled sled. Get er' runnin and have fun with her. Post some pics if you have any.