Quote:
|
Originally Posted by rocky67
Anyone ever have any trouble getting the air box seated back in place? I'm talking specifically about the carb boots that connect the air box to the carbs. The middle ones seem tough to seat as there is not allot of wiggle room with the box.
I read in a mag that it is real importatn to have these seated properly so you don't suck in ambient or warm air.
|
Ya I can't remember exactly why I removed them but I DO rememebr I had a hell of a time getting them seated back in place. Just take alot of time and some patience. I think I used a little silocone spray as a little lube to get them to slide back in place actually. Good luck
Linear Mode
