So after running wires to find out why my ignition/tether&kill switch was not shutting down my machine. I ran all wires and found that my ground wire(brown wire) to side of motor is bad. Anyways while checking all my wiring I removed the voltage reg and it looks as though it is fried? Any comments, should I replace it? and what would cause this?
I did find also the black wire going from the V/R up was fried/frayed. Im wondering if there was a spike in voltage to cause a surge ion the ground side.
If I had an electrical component that looked like that on a vehicle that was going to be miles from my truck in 3 feet of snow, you betcha I would replace it. Heat is not good on electronics and that got hot somehow. Looks like an invite to take a walk in the woods to me
2007 Dragon RMK 700 155", 2008 RMK 600 155", 95 Prowler 550 2-up, Really OLD AC Cheetah
1992 Ski Doo Mach 1 (SC-10/2 suspended) March '07 SF.com Sled of the Month! (Lost in fire 4-7-13) 2009 Ski Doo MXZ 500SS TnT
2006 Ski Doo MXZ 500SS
1999 Ski Doo MXZ600 Webmaster Evergreen Valley Snowmobile Club SledNH.com Moderator