mikeg425

hey guys,

I got my sled out of storage today and was getting it ready to sell, sled ran and ideled great, the problem- none of my electrical was working, including my guages and lights. all visible adaptors were conected and no wires were chewed through. any ideas?

thanks,
mike

beef5

check your hand warmers switches i have the same problem on my 440 if the thumb is on low it will short out the lights and gauges

mikeg425

ok, ill go try it out. thanks for the help

smallengineguy

Check ALL the wiring for rodent chewing, bad ground, etc. Gotta be something simple. Check the plug coming out of the engine if NOTHING is working.

__________________
1992 Ski Doo Mach 1 (SC-10/2 suspended) March '07 SF.com Sled of the Month!
1993 Ski Doo Mach Z 780 triple
1999 Yamaha Venture 500 touring
2001 Ski Doo Mini Z

Assistant Trailmaster Evergreen Valley Snowmobile Club
SledNH.com Moderator

If I'm not home, CHECK THE TRAILS!

mikeg425

thanks for all the help guys. i found the problem, a splice was cracked and was not getting a solid conection